Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
73
Note:
Some series devices don’t support WIFI and WPS function.
WPS function is supported by the devices with WPS button.
5.2.12.1 WIFI
WIFI info can show the name, status, IP information of the Current Hot Spot. Usually please “Refresh”
WIFI work information after reconnection to ensure the real-time display of the work status, because it
often takes some time to connect WIFI Hot Spot, which depends on the network signal strength.
Figure 5-45
WIFI setting method is as follows:
Step 1 Click ，show as ，means enabling WIFI function.
Step 2 Click “ Search SSID”, and shows the wireless network hot spot of the current network camera
environment in the list.