Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
72
Time Range
It is the time period to set dial-up. It can activate the function
via message to enable/disable dial-up function if it is
beyond the time period.
IP Address
It will display the acquired IP after the dial-up is successful
via 4G.
5.2.11.2 Mobile Setting
Figure 5-44
Please refer to the following sheet for detailed information.
Parameter
Function
Message Send
In the event, after the corresponding message activation is
enabled, it will send message to the phone of receiver when
event happens. It needs to enable the function of message
activation function in the event interface when using the
function.
Message
Activation
It can send message ON/OFF to the SIM card inside the device by
the mobile phone in the list, which is to enable /disable the dial-up
function and send REBOOT to restart the device.
Phone Activation
You can use the mobile phone in the calling list to call the SIM card
inside the device to enable dial-up function.
5.2.12 WIFI