Operation Manual

Dahua Network Camera Web 3.0 Operation Manual

Parameter

Function

Watermark Settings

Select “Watermark Setting” and enable watermark

function. After the watermark function is enabled, you

can check if the video is tampered via verifying

watermark character.

Watermark Character

It is the character of watermark verification, it is

DigitalCCTV by default.

 Video Clip

1. Select “Sub Stream 2” in the drop-down box, click “Enable”.

2. Enable “Video Clip”, click .

The system will display the interface of “Area”, which is shown in Figure 5-14.

Figure 5-14