Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
41
Figure 5-10
Step 3
Click “Save” to complete the settings of profile management.
Note:
Click “Default” to restore the device to default config; click “Refresh” to check the latest config file of the
device.
5.1.1.9 Zoom and Focus
Note:
Only motorized vari-focal devices support focus and zoom function.
Step 1
Select “Setup > Camera > Conditions > Zoom and Focus” and the system will display the interface of
“Zoom and Focus” which is shown in Figure 5-11.
Figure 5-11