Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
40
5.1.1.8 Profile Management
Step 1
Select “Setup > Camera > Conditions > Profile Management” and the system will display the interface of
“Profile Management”.
Step 2
Set profile management.
 When the “Profile Management” is set as “Normal”, the system will monitor according to the normal
config.
Figure 5-8
 When the “Profile Management” is set as “Full Time”, you can select “Always Enable” in “Day” or
“Night’, the system will monitor according to the config of “always enable”.
Figure 5-9
 When the “Profile Management” is set as “Schedule”, you can set some period as day and another
period as night, for example, if it sets 0:00~12:00 as day, 12:00~24:00 as night, then the system will
monitor by adopting corresponding config in different periods.