Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
38
Figure 5-6
Step 2
It is to set defog mode according to the actual scene.
 When the “Mode” is set as “Manual”, it is to manually set intensity and air light mode, the system
will adjust the image definition according to the intensity and air light mode which have been set
previously. As for air light mode, you can set manual or auto.
 When the “Mode” is set as “Auto”, the system will auto adjust the image definition according to the
actual scene.
 When the “Mode” is set as “Off”, then the defog function is disabled.
Step 3
Click “Save” to complete the config of defog mode.
5.1.1.7 IR Light
You can directly set the mode of IR light if the device is equipped with IR light.
Step 1
Select “Setup > Camera > Conditions > IR Light” and the system will display the interface of “IR Light”
which is shown in Figure 5-7.