Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
19
Click “Start” and it will start pattern according to the pattern spot which has been set; click “Stop” and
the pattern ends.
3.5 Assistant
Assistant interface is shown in Figure 3-8.
Figure 3-8
Steps to assistant are:
Step 1. In assistant box input assistant value.
Step 2. Click on Aux On to turn on aux function.
Click on Aux off to turn off aux function.
3.6 Light Wiper
Light wiper interface is shown in Figure 3-9.
Figure 3-9
Steps to light wiper are:
 Click on Enable to enable light wiper function.
 Click on Disable to disable light wiper function.