Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
18
Figure 3-6
Steps to tour are:
Step 1. In tour box, input tour path value.
Step 2. Click on Add. Range of tour relates to PTZ protocol.
Step 3. In preset box, input preset value.
Step 4. Click on Add as to add a preset in this tour. If click on Del, it deletes this preset in tour.
Note:
You can add more than one preset here, or delete more than one preset.
3.4 Pattern
Pattern interface is shown in Figure 3-7.
Figure 3-7
Steps to set pattern are shown as follows:
Step 1
Input pattern serial number value in the box, click “Add” and it will display “Start Rec” and “Stop Rec”.
Step 2
Click “Start Rec” to implement a series of operations such as zoom, focus, iris, direction and so on.
Step 3
Click “Stop Rec” to complete the setting of a pattern path.
Step 4