Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
124
Parameter
Function
Remote
Directory
Set storage directory, videos and pictures can be stored in to corresponding server
directory.
5.4.3 Record control
The record control interface is shown as in Figure 5-100.
Figure 5-100
Please refer to the following sheet for detailed information.
Parameter
Function
Pack
Duration
Here you can select file size within 1min~120min. Default setup is 8
minutes.
Pre-record
Please input pre-record value here.
For example, system can record the four seconds video in the buffer.
The record begins from the fifth second.
Note:
Configure pre-record time, when alarm or motion detection occurs, if
there is no record, system will record the preceding n seconds
record.
Disk Full
There are two options: stop recording or overwrite the previous files
when HDD is full.
 Stop: Current working HDD is overwriting or current HDD is full,
it will stop record.
 Overwrite: Current working HDD is full; it will overwrite the
previous file.
Record
mode
There are three modes: Auto/manual/close.
Record
stream
There are two options: main stream and sub stream.