Operation Manual

Dahua Network Camera Web 3.0 Operation Manual
7
Parameter
Function
Main stream
Click it to enable main stream video monitoring and click again
to disable it. Generally for storage and monitor.
Sub Stream 1
Click it to enable Sub Stream1 video monitoring and click again
to disable it. When network bandwidth is insufficient, it
substitutes main stream for monitoring.
Sub Stream 2
Click it to enable Sub Stream 2 video monitoring and click again
to disable it. When network bandwidth is insufficient, it
substitutes main stream for monitoring.
Protocol
You can select stream media protocol from the dropdown list.
There are three options: TCP/UDP/Multicast
2.2 System Menu
System menu is shown as in Figure 2-3.
Please refer to chapter 2 Live, chapter 3 PTZ, chapter 4 Playback, chapter 5 Setup, chapter 6 Alarm,
chapter 7 Log out for detailed information.
Figure 2-3
2.3 Video Window Function Option
The interface is shown as below. See Figure 2-4.
Figure 2-4
Please refer to the following sheet for detailed information.
SN
Parameter
Function
1
Relay-out
It shows if there is any alarm output, status description is as
follows:
 Red: means there is alarm output.
 Grey: means alarm is over.
Click on the button to force alarm to be on or off.
1 2 3 4 5 6 7 8 9