User Guide

Quick Start Guide
2
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on the webpage. For more
information, see Web Operation Manual.
●
Device initialization is available on select models, and it is required at first-time use and after the
device is reset.
●
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stays on the same network segment.
●
Plan usable network segment properly for the device.
●
The following figures and pages are for reference only.
2.1 Initializing the Camera
Step 1 Search for the device that needs to be initialized through ConfigTool.
1. Double-click ConfigTool.exe to open the tool.
2. Click
Modify IP
.
3. Select the searching way, and then click
OK
.
4. Select one or several uninitialized cameras, and then click
Initialize
.
Step 2 Select the devices to be initialized, and then click
Initialize
.
If you do not provide an email address for password reset, you can reset the password only
through XML file.
Figure 2-1 Password setting