User's Manual

Parameter
Description
Manufacturer
Select Private.
Supported protocol might vary with different models.
IP Address Input the IP address of the target camera.
RTSP Port
Input the RTSP port of the target device, and it is 554 by default.
Not required when the Manufacturer is configured to Private or
Customized.
HTTP Port
Input the HTTP port of the target device, and it is 80 by default.
Not required when the Manufacturer is configured to Private or
Customized.
TCP Port Value is 37777 by default.
Username/Password Input the user name/password of the camera you need.
Channel No.
Click Connect, and then the video stream quantity of the target
camera is displayed at Channel No., and this is not editable. The
system adds all video streams to the NVR.
It is recommended to click Connect to obtain the number. If the
channel number is wrong, the operation will fail.
If the target device is human body recognition camera, you must
click Connect to obtain the number.
Remote channel No.
If the target camera has already connected to another NVR, then its
channel No. on that NVR is displayed here.
Channel
Displays the channel No. on your NVR to which you connect the
target camera.
Decode Buffer
You can select from Default, Real time, and Fluent. Real time
provides best live video quality, but also requires network with fast
speed to respond to IVS detection, Default is medium, and Fluent is
the safest choice.
Click OK.
Import from Template
You can export the template from other NVR, and then import to your NVR.
 Templates with different languages as your NVR are not compatible.
 You cannot open and view encrypted templates.
Click Import to select the template you need.
If there are cameras in the template which IP addresses are already existed, there will be a
notice, and you can select whether to overwrite or to add new IP address.
You can view the camera connection status at Added Device.
Parameter
Description
CH The channel No. on your NVR to which you connected the video stream..
Modify Click to modify device information. See Table 5-3.
Delete
Select one or multiple devices, and then click to delete them from your
NVR.