User's Manual

6.5.1 Setting SMD in a Network Camera
Log into the camera’s web interface and select the SETTING tab.
Click Event menu item, at the left side of the screen. Then, click Video Detection and
select the Motion Detection tab.
Enable Motion Detection on the camera and click OK.
Click the Event menu again. Then select Smart Motion Detection.
Click the Enable check box to activate Smart Motion Detection.
Click the check box to activate Smart Motion Detection for Human Objects, Vehicular
Objects, or both.
Select the detection sensitivity.
Click Save to apply the Smart Motion Detection options.
6.5.2 Setting SMD in a Network Video Recorder
Log into the network video recorder.
Click the AI menu.
Click the Parameters menu, and then select SMD.
Select the channel for the camera that supports Smart Motion Detection.