User's Manual

Click Draw Line and move the cursor into the scene cameo window to indicate the
direction of people flow, this direction determines if a person is entering or leaving the
area. The function determines the direction of flow by the angle of the line in relation to the
monitoring area. Use the following illustrations as a guide to help determine the people
flow direction.
Line Color
Description
Green Box Monitoring area
Blue Arrow Direction of the DRAW LINE operation
Red Arrow
Direction of people flow. The entrance to the monitoring area is opposite
the direction of the arrow.
Set the functional parameters using the table below:
Parameter
Description
Inside
Number
Click the check box to display the number of people inside the monitoring
area on the camera’s live view.
Period
Configure working period, and the rule takes effect only within this period.
1. Click Setting to open the Period setting window.
2. Configure each period.
A: Press and hold the left mouse button, and then drag at the periods you
need.
B: Click the Setting behind the week day you need, and then the week
day in the period setting box shows red color, select and configure
the periods you need, and you can configure 6 periods in one week
day at most.
3. Click OK.
Sensitivity
Set the sensitivity level for the number of people in the monitoring area.
Set the sensitivity between 1 and 10 (default: 7).