User's Manual

6.2.6 Parking Detection
The Parking Detection function monitors a defined area for the presence of a vehicle that
remains in the area without motion for longer than a specified amount of time. The object must
remain static during the surveillance duration for the function to trigger an alarm.
For best results, ensure the length of the vehicle in the monitoring area does not exceed 1/5
the size of the scene and install the camera at least 6 m (20 ft) above the scene
Parameter
Description
Period
Configure working period, and the rule takes effect only within this period.
1. Click Setting to open the Period setting window.
2. Configure each period.
A: Press and hold the left mouse button, and then drag at the periods you need.
B: Click the Setting behind the week day you need, and then the week day in
the period setting box shows red color, select and configure the periods
you need, and you can configure 6 periods in one week day at most.
3. Click OK.
Duration
Set the amount of time, in seconds, that a vehicle must remain in the defined
area before the function triggers the alarm.
Set the time between 6 seconds and 300 seconds (default: 6 seconds).
Record
Select Record to send video data to the camera’s onboard storage when a
tripwire alarm is triggered. Then, set a record delay period, in seconds.
The camera must have an on-board storage mechanism, specifically a
MicroSD card slot with a MicroSD card installed.