User's Manual

5.4.2 Adding Cameras
You can add cameras to the NVR and manage them remotely.
Log in the NVR web interface, and then select SETUP > IMAGE > REGISTRATION.
The REGISTRATION interface is displayed.
Add devices
You can add cameras with auto scan, manual search or template.
The target camera cannot have the same IP address or TCP port with any existing camera.
Auto scan
Click Device Search.
The system will start scanning all the available devices, after the searching progress goes
to 100%, all the devices are displayed, including cameras, NVR, and other devices, and you
can select IPC from the Filter. See Figure 5-2. Refer to Table 5-2 for more details.
Double click the device information or select the check box in front of it, and then click Add.
You can refresh the Added Device list to avoid adding the same camera repeatedly.