Instruction Manual

Here you can set the following items:

z Preset

z Tour

z Pattern

z Border

Figure 4-38

In X328H328H328H Figure 4-35X, click page switch button, the interface is shown as in X331H331H331HFigure 4-39.

Here you can activate the following functions:

z Preset

z Tour

z Pattern

z Auto scan

z Auto pan

z Flip

z Reset

z Page switch

Figure 4-39

Note:

z Preset, tour and pattern all need the value to be the control parameter. You can define it as

you require.

z You need to refer to your speed dome user’s manual for Aux definition. In some cases, it

can be used for special process.

z The following setups are usually operated in the

X332H332H332HFigure 4-35,Figure 4-38 and Figure 4-39,X333H333H333

4.9.1Preset Setup

In X335H335H335H X332H332H332HFigure 4-35X, use eight direction arrows to adjust camera to the proper position.

X336H336H336H Figure 4-38, click preset button and input preset number. The interface is shown as in X337H337H337HFigure

4-40