Owner's manual

4.9 Preset/ Patrol/Pattern/Scan

In X328H328H328H332HFigure 4-32X, please click the “set” button. The interface is shown as below. See X329H329H329H333HFigure 4-35X.

Here you can set the following items:

z Preset

z Tour

z Pattern

z Border

Figure 4-35

In X330H330H330H334HFigure 4-32X, click page switch button, the interface is shown as in X331H331H331H335HFigure 4-36X.

Here you can activate the following functions:

z Preset

z Tour

z Pattern

z Auto scan

z Auto pan

z Flip

z Reset

z Page switch

Figure 4-36

Note:

z Preset, tour and pattern all need the value to be the control parameter. You can define it as

you require.

z You need to refer to your speed dome user’s manual for Aux definition. In some cases, it

can be used for special process.

z The following setups are usually operated in the

X332H332H332H336HFigure 4-32X,X333H333H333H337HFigure 4-35X and X334H334H334H338HFigure 4-36X .

4.9.1Preset Setup