Manual

89
Figure 6-6
6.2.1 Preset Setup
Note: The following setups are usually operated in the X405H405H405H357HFigure 6-2X, X406H406H406H358HFigure 6-5X and X407H407H407H359HFigure 6-6X.
In
X408H408H408H360HFigure 6-2X, use eight direction arrows to adjust camera to the proper position.
In
X409H409H409H361HFigure 6-5X, click preset button and input preset number. The interface is shown as in X410H410H410H362HFigure
6-7
X.
Add this preset to one patrol number
Figure 6-7
6.2.2 Activate Preset
In X411H411H411H363HFigure 6-6X please input preset number in the No. blank, and click preset button.
6.2.3 Patrol Setup
In X412H412H412H364HFigure 6-5X, click patrol button. The interface is shown as in X413H413H413H365HFigure 6-8X.
Input preset number and then add this preset to one patrol.
Figure 6-8
6.2.4 Activate Patrol
In X414H414H414H366HFigure 6-6X, input patrol number in the No. blank and click patrol button
6.2.5 Pattern Setup
In X415H415H415H367HFigure 6-5X, click pattern button and then click begin button. The interface shows like X416H416H416H368HFigure 6-9X.
Please go to
X417H417H417H369HFigure 6-2X to modify zoom, focus, and iris. Go back to X418H418H418H370HFigure 6-9X and click end
button.