Manual
61
Figure 4-41
4.9.4 Activate Patrol (tour)
In X341H341H341H Figure 4-38X, input patrol (tour) number in the No. blank and click patrol button
4.9.5 Pattern Setup
In X342H342H342H Figure 4-38X X, click pattern button and then click “begin” button. The interface is shown as in X343H343H343H
Figure 4-38
X X. Then you can go to X344H344H344HFigure 4-35 X to modify zoom, focus, and iris.
Go back to
X345H345H345H Figure 4-42 and click “end” button. You can memorize all these operations as pattern
1.
Figure 4-42
4.9.6 Activate Pattern Function
In X346H346H346HFigure 4-39, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In X347H347H347HFigure 4-38, click border button. The interface is shown as in X348H348H348HFigure 4-43.
Please go to
X349H349H349HFigure 4-35, use direction arrows to select camera left limit
Then please go to
X350H350H350HFigure 4-43X and click left limit button
Repeat the above procedures to set right limit.
Figure 4-43