Manual

60
z Pattern
z Auto scan
z Auto pan
z Flip
z Reset
z Page switch
Figure 4-39
Note:
z Preset, tour and pattern all need the value to be the control parameter. You can define it as
you require.
z You need to refer to your speed dome user’s manual for Aux definition. In some cases, it
can be used for special process.
z The following setups are usually operated in the
X332H332H332HFigure 4-35,Figure 4-38 and Figure 4-39,X333H333H333
4.9.1Preset Setup
In X335H335H335H X332H332H332HFigure 4-35X, use eight direction arrows to adjust camera to the proper position.
In
X336H336H336H Figure 4-38, click preset button and input preset number. The interface is shown as in X337H337H337HFigure
4-40
X.
Now you can add this preset to one tour.
Figure 4-40
4.9.2 Activate Preset
In X338H338H338HFigure 4-39, please input preset number in the No. blank, and click preset button.
4.9.3 Patrol setup (Tour Setup)
In X339H339H339H Figure 4-38X, click patrol button. The interface is shown as in X340H340H340H Figure 4-41X.Input preset number
and add this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets.