Manual

113
NAS
NAS interface is shown as in
X465H465H465H417HFigure 7-35X.
Please make sure your DVR support this function.
Figure 7-35
Please refer to the following sheet for detailed information.
Parameter Function
NAS enable
Please select network storage protocol and then enable
NAS function.
Server IP Input remote storage server IP address.
Port
Input Remote storage server port number.
User Name
Log in user account.
File length The file length you upload to the FTP.
When setup is larger than the actual file length, system
will upload the whole file. When setup here is smaller
than the actual file length, system only uploads the set
length and auto ignore the left section. When interval
value is 0, system uploads all corresponding files.
Password The password you need to log in the server.
Remote Path Remote storage file path.
Save You can click save button after you complete setup for
one channel, or you can complete the whole setups and
then click save button.
Refresh Click this button to get device latest configuration
information.
NTP