Manual

Parameter Function

Keyboard: COM control protocol. You can use keyboard to

control DVR via COM.

Data Bit

The value ranges from 5 to 8.

Stop Bit

There are three options: 1/2.

Baud Bit You can select corresponding baud bit here.

Parity

There are four options: none/odd/even.

System default setup is:

z Function: Console.

z Data bit: 8

z Stop bit: 1

z Baud bit: 115200

z Parity: None.

7.3.2.5 Network

Network interface is shown as in X462H462H462H414HFigure 7-32X.

Figure 7-32

Please refer to the following sheet for detailed information.

Parameter Function

Ethernet Please select the network card first.

DHCP Dynamically get IP address. You can get the device IP from

the DHCP server if you enabled this function.

TCP Port Default value is 37777.

HTTP Port Default value is 80.