User's Manual
Table Of Contents
- Cybersecurity Recommendations
- Regulatory Information
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Camera
- 3.2.2 Dome Camera
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
Setting 143
Select Setting > System > Safety > System Service. Step 1
The System Service interface is displayed. See Figure 4-98.
System service
Figure 4-98
Enable functions on the System Service interface. See Table 4-50. Step 2
Table 4-50 System service parameters description
Parameter
Description
SSH
Disabled by default.
SSH (Secure Shell) can encode your data for its transmission. By this
way, data leakage can be prevented when you manage your device
remotely.
Password Reset
Enabled by default.
If you choose to disable this function, then you can only restore hardware
to reset password.
CGI Service
Enabled by default.
Enable CGI（Common Gateway Interface）and then you can use your
browser to get data from the server.
Onvif Service
Enabled by default.
Enable Onvif service to connect your device to network video products
(front ends of both vidicons and video recorders, and video recorders
included) by other manufacturers.
Genetec Service
Enabled by default.
Audio and Video
Transmission
Encryption
Disabled by default.
If you enable this function, ensure the matching devices or software
can decode audio and video you have encoded.
Transmission of audio and video between your device and the
third-party platform cannot be encoded. So, for data security, we
recommend you to disable CGI service and Onvif service.