User's Manual

Setting 142
 When accessing through WAN, you can only use MAC of your router to limit MAC
verification.
 You cannot enable white list and black list at the same time.
 You cannot add your device IP/MAC to the white list.
Select Setting > System > Safety > IP Filter. Step 1
The IP Filter interface is displayed. See Figure 4-97.
IP filter Figure 4-97
Select the check box of Enable. Step 2
 Add an IP/Mac address to the white list.
1) Click the Trusted Sites tab.
The Trusted Sites interface is displayed.
2) Click Add IP/MAC.
The dialogue box of Add IP/MAC is displayed.
3) Set IP/MAC address. See Table 4-48.
Table 4-48 IP/MAC address parameters description (trusted sites)
Parameter
Description
IP address
IP address you are going to authorize.
IP segment
Start address and end address of the IP segment.
MAC address
MAC address you are going to authorize.
4) Click Save.
 Add an IP/Mac address to the black list.
1) Click the Banned List tab.
The Banned List interface is displayed.
2) Click Add IP/MAC.
The dialogue box of Add IP/MAC is displayed.
3) Set IP/MAC address. See Table 4-49.
Table 4-49 IP/MAC address parameters description (banned list)
Parameter
Description
IP address
IP address you are going to prohibit.
IP segment
Start address and end address of the IP segment.
MAC address
MAC address you are going to prohibit.
4) Click Save.
Click Save to finish configuration. Step 3
4.8.4.3 Configuring System Service
You can set functions such as SSH, password reset, CGI service, Onvif service, genetec
service, audio and video transmission encryption and mobile push.