User's Manual
Table Of Contents
- Cybersecurity Recommendations
- Regulatory Information
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Camera
- 3.2.2 Dome Camera
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
Setting 119
4.5.5.3 Configuring Illegal Access Parameters
If the password is continuously wrongly typed and the mistakes have reached the maximum
you have set, an alarm will be triggered and linked activities will be executed.
Select Setting > Event > Abnormality > Illegal Access. Step 1
The Illegal Access interface is displayed. See Figure 4-62.
Illegal access Figure 4-62
Select the Enable check box. Step 2
Configure illegal access parameters. See Table 4-36 for details. Step 3
Table 4-36 Illegal access parameter description
Parameters
Description
Login error
The number of times that the login password is allowed to be
wrongly entered for.
When the login password has been wrongly entered for more than
the set times, the account is locked. You need to wait 30 minutes
before your account is unlocked.
Relay-out
You can connect this relay-out port to such alarm devices as light
and siren. When an alarm is triggered, those alarm devices will work.
Select the check box to enable this function.
Alarm Delay
Set a length of time for the Device to delay turning off alarm after an
event is actually ended.
Send Email
Select the Send Email check box and an e-mail will be delivered to
the device user once an alarm is triggered.
Set your e-mail first before enabling the Send Email function. See
"4.2.5 Configuring SMTP" for detailed operations.
Click Save to finish configuration. Step 4
4.5.5.4 Configuring Lenses Anti-Burning
Configure the lenses’ anti-burning parameters and when the lenses are watching directly
towards the sun and face the potential burning, the camera will automatically turn to other
positions to avoid.