User's Manual

Setting 98
You have set smart plans of presets or channels. See "4.4.1 Configuring Smart Plan" for
detailed operations.
Procedure
Select Setting > Smart Thermal > IVS > Global Setup. Step 1
The Global Setup interface is displayed. See Figure 4-47.
Global setup Figure 4-47
Select a preset in Preset bar. Step 2
The camera turns to the position.
You need this step only when presets are supported in this Device.
Add detected area and excluded area. Step 3
1) Click Add Detect Region to draw a detected area on surveillance image.
Right-click to end drawing.
Click Add Detect again to redraw.
2) Click Add Excluded Area to draw an excluded area on surveillance image.
Right-click to end drawing.
 Click Delete Excluded Area to delete the excluded area.
 An excluded area takes effect only when it has been drawn in the detected
area.
 Multiple excluded areas can be drawn in the detected area.
Configure global setup parameters. See Table 4-26 for details. Step 4
Table 4-26 Global setup parameters
Parameter
Description
Anti-Disturb
Enable
Select the On check box to enable this function.
This function is aimed at eliminating disturbance caused by shaking
leaves or waving water.