User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
88
Figure 8-5 Face recognition flowchart
8.2.1 Setting Face Detection
When a face is recognized in the detection area, the system performs alarm linkage.
Procedure
Step 1 Select
AI
>
Smart Plan
.
Step 2 Click next to
Face Recognition
to enable face recognition of the corresponding
channel, and then click
Next
.
Figure 8-6 Face detection
Step 3 Click next to
Enable
to enable the face detection function.
Step 4 (Optional) Click other icons at the right side of the image to draw detection area,
exclusion area, and filter targets in the image.
● Click to draw a face detection area in the image, and right-click to finish the
drawing.
● Click to draw an exclusion area for face detection in the image, and right-click
to finish the drawing..