User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
85
8 AI
8.1 Setting Crowd Distribution Map
You can view crowd distribution on the map in real time for timely arming, to prevent stampede
and other accidents.
8.1.1 Global Configuration
Set the calibration parameters of panoramic cameras.
Calibration Purpose
Determine corresponding relationship between 2D image captured by the camera and 3D
actual object according to one horizontal ruler and three vertical rulers calibrated by the user
and the corresponding actual distance.
Notes
When drawing calibration ruler, keep the ruler length consistent with the actual length of the
object.
Procedure
1. Select
AI
>
Smart Plan
.
2. Click next to
Crowd Distribution Map
to enable crowd distribution map of the
corresponding channel, and then click
Next
.
3. Click the
Global Config
tab.
4. Click the rule icon to draw one horizontal ruler and three vertical rulers on the image.
● is the vertical ruler icon, and is the vertical horizontal icon.
● Select the added rulers on the image, and click to delete them.
Figure 8-1 Global configuration of crowd distribution map
5. Select a calibration type and enter the actual length, and then click
Add Rulers
.
6. Click
Apply
.