User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
67
Parameter
Description
Current Time
Configure system time.
Click
Sync PC
, and the system time changes to the PC time.
DST
Enable DST as needed.
Click , and configure start time and end time of DST with
Date
or
Week
.
Step 3 Click
Apply
.
6.6.2 Account
You can manage users, such as add, delete, or edit them. Users include admin, added users
and ONVIF users.
Managing users and groups are only available for administrator users.
● The max length of the user or group name is 31 characters which consists of number, letter,
underline, dash, dot and @.
● The password must consist of 8 to 32 non-blank characters and contain at least two types of
characters among upper case, lower case, number, and special character (excluding ' " ; :
&).
● You can have 18 users and 8 groups at most.
● You can manage users through single user or group, and duplicate usernames or group
names are not allowed. A user can only be in one group at a time, and the group users can
own authorities within group authority range.
● Online users cannot edit their own authority.
● There is one admin by default which has highest authority.
● Select
Anonymous Login
, and then log in with only IP address instead of username and
password. Anonymous users only have preview authorities. During anonymous login, click
Logout
, and then you can log in with other username.
6.6.2.1 User
6.6.2.1.1 Adding User
You are admin user by default. You can add users, and configure different permissions.
Step 1 Select >
System
>
Account
>
User
.