User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
65
Functions might vary with different models, and the actual product shall prevail.
Select >
Storage
.
● Click
Read-Only
, and then the SD card is set to read only.
● Click
Read & Write
, and then the SD card is set to read & write.
● Click
Hot Swap
, and then you can pull out the SD card.
● Click
Format
, and you can format the SD card.
When reading SD card on PC, if the SD card capacity is much less than the nominal
capacity, you need to format the SD card. Then the data in SD card will be cleared, and the
SD card is formatted to be private file system. The private file system can greatly improve
SD card multimedia file read/write performance. Download Diskmanager from Toolbox to
read the SD card. For details, contact after-sales technicians.
Figure 6-58 Local
6.6 System
This section introduces system configurations, including general, date & time, account, safety,
PTZ settings, default, import/export, remote, auto maintain and upgrade.
6.6.1 General
6.6.1.1 Basic
You can configure device name, language and video standard.
Step 1 Select >
System
>
General
>
Basic
.
Figure 6-59 Basic
Step 2 Configure general parameters.
Table 6-23 Description of general parameters
Parameter
Description
Name
Enter the device name.