User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
61
Figure 6-53 Motion detection
Step 2 Click to enable the motion detection function.
Step 3 Set the area for motion detection.
1) Click
Setting
next to
Area
.
Figure 6-54 Area
2) Select a color and set the region name. Select an effective area for motion
detection in the image and set
Sensitivity
and
Threshold
.
● Select a color on to set different detection parameters for
each region.
● Sensitivity: Sensitive degree of outside changes. It is easier to trigger the alarm
with higher sensitivity.
● Threshold: Effective area threshold for Motion Detection. The smaller the
threshold is, the easier the alarm is triggered.
● The whole video image is the effective area for Motion Detection by default.
● The red line in the waveform indicates that the Motion Detection is triggered,
and the green one indicates that there is no motion detection. Adjust sensitivity