User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
57
Functions of different devices might vary, and the actual product shall prevail.
Step 1 Click at the right-upper corner of the main interface.
Figure 6-49 Alarm (subscription)
Step 2 Click next to
Enable Alarm
.
Step 3 Select alarm type according to the actual need. For details, see "6.4.1.3.2 Subscribing
Alarm Information".
The system prompts and records alarm information according to actual conditions.
When the subscribed alarm event is triggered and the alarm subscription interface is
not displayed, a number is displayed on , and the alarm information is recorded
automatically. Click to view the details in the alarm list. You can click
Clear
to
clear the record.
Step 4 Click next to
Play Alarm Tone
, and select the tone path.
The system will play the selected audio file when the selected alarm is triggered.
6.4.2 Setting Exception
Abnormality includes SD card, network, illegal access, voltage detection, and security
exception.