User's Manual

Operation Manual
54
Figure 6-44 Schedule
Step 2 Press and drag the left mouse button on the timeline to set arming periods. Alarms will
be triggered in the time period in green on the timeline.
● Click
Copy
next to a day, and select the days that you want to copy to in the
prompt interface, you can copy the configuration to the selected days. Select the
Select All
check box to select all days to copy the configuration.
● You can set 6 time periods per day.
Step 3 Click
Apply
.
Step 4 (Optional) Click
Time Plan Table
to add a new time plan table.
You can:
● Double-click the table name to edit it.
● Click to delete the tale as needed.
6.4.1.2.2 Record Linkage
The system can link record channel when an alarm event occurs. After alarm, the system stops
recording after an extended time period according to the
Post-Record
setting.
Prerequisites
● After the corresponding alarm type (
Normal
,
Motion
, or
Alarm
) is enabled, the record
channel links recording. For details, see "13.3 Setting Record Plan".
● Enable auto record mode, the record linkage will take effect. For details, see "13.2 Setting
Record Control".
Setting Record Linkage
On the
Alarm
interface, click to enable record linkage, select the channel as needed,
and set
Post-Record
to set alarm linkage and record delay.
After
Post-Record
is configured, alarm recording continues for an extended period after the
alarm ends.