User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
51
Figure 6-41 Basic service
Step 2 Enable the basic service according to the actual needs.
Table 6-21 Description of basic service parameters
Function
Description
SSH
You can enable SSH authentication to perform safety
management.
Multicast/Broadcast
Search
Enable this function, and then when multiple users are
viewing the device video image simultaneously through
network, they can find your device with multicast/broadcast
protocol.
CGI
Enable the function, and then other devices can access
through this service. The function is enabled by default.
Onvif
Genetec
Mobile Push Notification
Enable this function, and then the system will send the
snapshot that was taken when alarm is triggered to your
phone, this is enabled by default.
Private Protocol
Authentication Mode
Select the authentication mode from
Security Mode
and
Compatible Mode
. Security mode is recommended.
Step 3 Click
Apply
.