User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
50
Figure 6-40 RTMP
Step 2 Click .
Make sure that the IP address is trustable when enabling RTMP.
Step 3 Configure RTMP parameters.
Table 6-20 Description of RTMP parameters
Parameter
Description
Stream Type
The stream for live view. Make sure that the video format is
H.264, H.264 B and H.264H, and the audio format is AAC.
Address Type
●
Non-custom
: Enter the server IP and domain name.
●
Custom
: Enter the path allocated by the server.
IP Address
When selecting
Non-custom
, you need to enter server IP
address and port.
●
IP address
: Support IPv4 or domain name.
●
Port
: Keep the default value.
Port
Custom Address
When selecting
Custom
, you need to enter the path allocated
by the server.
Step 4 Click
Apply
.
6.3.13 Basic Service
Configure the IP hosts (devices with IP address) that are allowed to visit the device. Only the
hosts in the trusted sites list can log in to the web interface. This is to enhance network and
data security.
Step 1 Select >
Network
>
Basic Service
.