User's Manual

Operation Manual
47
Table 6-17 Description of multicast parameters
Parameter
Description
Multicast Address
The multicast IP address of
Main Stream
/
Sub Stream
is
224.1.2.4 by default, and the range is 224.0.0.0–
239.255.255.255.
Port
The multicast port of corresponding stream:
Main Stream
:
40000;
Sub Stream1
: 40016;
Sub Stream2
: 40032, and all
the range is 1025–65500.
Step 3 Click
Apply
.
Result
On the
Live
interface, select
RTSP
in
Multicast
, and then you can view the video image with
multicast protocol.
6.3.10 Register
After you enable this function, when the camera is connected into Internet, it will report the
current location to the specified server which acts as the transit to make it easier for the client
software to access the camera.
Step 1 Select >
Network
>
Register
.
Figure 6-36 Register
Step 2 Click , and then configure server name.
Table 6-18 Description of register parameters
Parameter
Description
Server Address
The IP address or domain name of the server to be registered.
Port
The port for registration.
Sub-Device ID
The custom ID for the camera.
Step 3 Click
Apply
.
6.3.11 QoS
You can solve problems such as network delay and congestion with this function. It helps to
assure bandwidth, reduce transmission delay, packet loss rate, and delay jitter to improve
experience.
0–63 means 64 degrees of priority; 0 for the lowest and 63 the highest.