User's Manual

Operation Manual
45
and authentication type to visit your device from the server.
Using
V1
and
V2
might cause data leakage, and
V3
is recommended.
Step 3 In
Trap Address
, enter the IP address of the PC that has MIB Builder and MG-SOFT
MIB Browser installed, and leave other parameters to the default.
Table 6-16 Description of SNMP parameters
Parameter
Description
SNMP Port
The listening port of the software agent in the device.
Read Community, Write
Community
The read and write community string that the software agent
supports.
You can enter number, letter, underline and dash to form the
name.
Trap Address
The target address of the Trap information sent by the software
agent in the device.
Trap Port
The target port of the Trap information sent by the software
agent in the device.
Read-only Username
Set the read-only username accessing device, and it is
public
by default.
You can enter number, letter, and underline to form the name.
Read/Write Username
Set the read/write username access device, and it is
private
by default.
You can enter number, letter, and underline to form the name.
Authentication Type
You can select from
MD5
and
SHA
. The default type is
MD5
.
Authentication Password
It should be no less than 8 digits.
Encryption Type
The default is CBC-DES.
Encryption Password
It should be no less than 8 digits.
Step 4 Click
Apply
.
Result
View device configuration through MIB Builder or MG-SOFT MIB Browser.
1. Run MIB Builder and MG-SOFT MIB Browser.
2. Compile the two MIB files with MIB Builder.
3. Load the generated modules with MG-SOFT MIB Browser.
4. Enter the IP address of the device you need to manage in the MG-SOFT MIB Browser, and
then select version to search.
5. Unfold all the tree lists displayed in the MG-SOFT MIB Browser, and then you can view the
configuration information, video channel amount, audio channel amount, and software
version.
Use PC with Windows and disable SNMP Trap service. The MG-SOFT MIB Browser will
display prompt when alarm is triggered.