User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
42
Mailbox
SMTP
server
Authentication
Port
Description
none
25
● You need to enable SMTP
service in your mailbox.
● The authentication code is
required; the email
password is not applicable.
Authentication code: the code
you receive when enabling
SMTP service.
Sina
smtp.sina.co
m
SSL
465
Enable SMTP service in your
mailbox.
none
25
126
smtp.126.co
m
none
25
Enable SMTP service in your
mailbox.
Step 4 Click
Apply
.
6.3.6 UPnP
UPnP (Universal Plug and Play), is a protocol that establishes mapping relation between local
area and wide area networks. This function enables you to visit local area device through wide
area IP address.
Prerequisites
● Make sure the UPnP service is installed in the system.
● Log in the router, and configure WAN IP address to set up internet connection.
● Enable UPnP in the router.
● Connect your device to the LAN port of the router.
● Select >
Network
>
TCP/IP
, in
IP Address
, enter the local area IP address of the
router or select
DHCP
and acquires IP address automatically.
Procedure
Step 1 Select >
Network
>
UPnP
.