User's Manual

Operation Manual
41
Parameter
Description
Receiver
● Receiver’s email address. Supports 3 addresses at most.
● After entering the receiver's email address, the
Test
button is
display. Click
Test
to test whether the emails can be sent and
received successfully.
Health Mail
The system sends test mail to check if the connection is
successfully configured. Click and configure the
Sending
Interval
, and then the system sends test mail as the set interval.
For the configuration of major mailboxes, see Table 6-15.
Table 6-15 Description of major mailbox configuration
Mailbox
SMTP
server
Authentication
Port
Description
QQ
smtp.qq.com
SSL
465
● The authentication type
cannot be
None
.
● You need to enable SMTP
service in your mailbox.
● The authentication code is
required, the QQ password
or email password is not
applicable.
Authentication code: The code
you receive when enabling
SMTP service.
TLS
587
163
smtp.163.co
m
SSL
465/99
4
● You need to enable SMTP
service in your mailbox.
● The authentication code is
required; the email
password is not applicable.
Authentication code: the code
you receive when enabling
SMTP service.
TLS
25
● You need to enable SMTP
service in your mailbox.
● The authentication code is
required; the email
password is not applicable.
Authentication code: the code
you receive when enabling
SMTP service.