User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
39
● Third party server might collect your device information after DDNS is enabled.
● Register and log in to the DDNS website, and then you can view the information of
all the connected devices in your account.
Figure 6-29 DDNS
Step 2 Click to enable the function.
Step 3 Configure DDNS parameters.
Table 6-13 Description of DDNS parameters
Parameter
Description
Type
The name and web address of the DDNS service provider, see the
matching relationship below:
● CN99 DDNS web address: www.3322.org
● NO-IP DDNS web address: dynupdate.no-ip.com
● Dyndns DDNS web address: members.dyndns.org
Server Address
Domain Name
The domain name you registered on the DDNS website.
Test
Only when selecting
NO-IP DDNS
type, you can click
Test
to check
whether the domain name registration is successful.
Username
Enter the username and password that you got from the DDNS
server provider. You need to register an account (includes
username and password) on the DDNS server provider's website.
Password
Interval
The update cycle of the connection between the device and the
server, and the time is 10 minutes by default.
Step 4 Click
Apply
.
Result
Open the browser on PC, enter the domain name at the address bar, and then press Enter, the
login interface is displayed.
6.3.5 Email
Configure email parameter and enable email linkage. The system sends email to the defined
address when the corresponding alarm is triggered.