User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
33
Step 3 Configure audio parameters.
Table 6-10 Description of audio parameters
Parameter
Description
Compression
You can select audio
Encode Mode
from
PCM
,
G.711A
,
G.711Mu
,
G.726
,
AAC
,
G.723
.
The configured audio encode mode applies to both audio and
intercom. The default value is recommended.
Sampling Frequency
Sampling number per second. The higher the sampling frequency
is, the more the sample in a second will be, and the more accuracy
the restored signal will be. You can select audio
Sampling
Frequency
from
8000
,
16000
,
32000
,
48000
,
64000
.
Audio Input Type
You can select audio input type from:
●
LineIn
: Requires external audio device.
●
Mic
: Not require external audio device.
Noise Filter
Enable this function, and the system auto filters ambient noise.
Microphone Volume
Adjusts microphone volume.
Speaker Volume
Adjusts speaker volume.
Step 4 Click
Apply
.
6.3 Network
This section introduces network configuration.
6.3.1 TCP/IP
You can configure IP address and DNS (Domain Name System) server and so on according to
network planning.
Prerequisites
The camera has connected to the network.
Procedure
Step 1 Select >
Network
>
TCP/IP
.