User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
31
Click
Reset
to clear the statistics data.
Step 3 Move the statistics box to the position that you want in the image.
Step 4 Click
Apply
.
The information will be displayed on the image after the face recognition function is
enabled.
6.2.2.2.11 Configuring Face Statistics
The image displays face statistics information. When the overlay function enabled during
intelligent rules configuration, this function is enabled simultaneously.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Face Statistics
.
Figure 6-23 Face statistics
Step 2 Click next to
Enable
, and select the text alignment.
Click
Reset
to clear the statistics data.
Step 3 Move the statistics box to the position that you want in the image.
Step 4 Click
Apply
.
6.2.2.3 ROI
Select ROI (region of interest) on the image and configure the image quality of ROI, and then
the selected image is display at defined quality.
Step 1 Select >
Camera
>
Encode
>
ROI
.