User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
28
6.2.2.2.5 Configuring Font Properties
You can enable this function if you need to adjust the font size in the video image.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Font Properties
.
Figure 6-17 Font properties
Step 2 Select the font color and size.
You can set the RGB value to customize the font color.
Step 3 Click
Apply
.
6.2.2.2.6 Configuring Picture Overlay
You can enable this function if you need to display picture information on the video image.
Text overlay and picture overlay cannot work at the same time.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Picture Overlay
.
Figure 6-18 Picture overlay
Step 2 Click next to
Enable
, click
Upload
, and then select the picture to be overlaid.
The picture is displayed on the video image.
Step 3 Move the overlaid picture to the position that you want in the image.
Step 4 Click
Apply
.
6.2.2.2.7 Configuring Custom Title
You can enable this function if you need to display custom information on the video image.