User's Manual

Operation Manual
27
6.2.2.2.3 Configuring Time Title
You can enable this function when you need to display time in the video image.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Time Title
.
Figure 6-15 Time title
Step 2 Click next to
Enable
.
Step 3 Click next to
Week Display
to display the day of week.
Step 4 Move the time box to the position that you want in the image.
Step 5 Click
Apply
.
6.2.2.2.4 Configuring Location
You can enable this function if you need to display text in the video image.
Text overlay and picture overlay cannot work at the same time, and the IPC that connects to
mobile NVR with private protocol would display GPS information as priority.
Step 1 Select >
Camera
>
Encode
>
Overlay
>
Location
.
Figure 6-16 Location
Step 2 Click next to
Enable
, enter the location information, and then select alignment.
The text is displayed in the video image.
Click to add the text overlay, and you can add 13 lines at most.
Step 3 Move the text box to the position that you want in the image.
Step 4 Click
Apply
.