User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
24
Figure 6-12 Encode
Step 2 Configure encode parameters.
Table 6-9 Description of encode parameters
Parameter
Description
Sub Stream
Click to enable sub stream, it is enabled by default.
You can enable multiple sub streams simultaneously.
Compression
Select encode mode.
●
H.264
: Main profile encode mode. Compared with H.264B, it
requires smaller bandwidth.
●
H.264H
: High profile encode mode. Compared with H.264, it
requires smaller bandwidth.
●
H.264B
: Baseline profile encode mode. It requires smaller
bandwidth.
●
H.265
: Main profile encode mode. Compared with H.264, it
requires smaller bandwidth.
●
MJPEG
: When under this mode, the image requires high bit
rate value to ensure clarity, you are recommended to set the
Bit Rate
value to the biggest value in the
Reference Bit
Rate
.
Smart Codec
Click to enable smart codec to improve video
compressibility and save storage space.
After smart codec is enabled, the device would stop supporting
the third bit stream, ROI, and smart event detection, and the
actual interface shall prevail.
Output Mode
You can select from
Single Stream
or
Flex Stream
.
Resolution
The resolution of the video. The higher the value is, the clearer
the image will be, but the bigger the required bandwidth will be.
Frame Rate (FPS)
The number of frame in one second of video. The higher the
value is, the clearer and smoother the video will be.