User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
23
Figure 6-11 Light
Step 2 Configure defog parameters.
Table 6-8 Description of defog parameters
Defog
Description
Manual
Configure function intensity and atmospheric light mode manually, and
then the system adjusts image clarity accordingly. Atmospheric light
mode can be adjusted automatically or manually.
Auto
The system adjusts image clarity according to the actual condition.
Off
Defog function is disabled.
Step 3 Click
Apply
.
6.2.2 Setting Encode Parameters
This section introduces video parameters, such as video, snapshot, overlay, ROI (region of
interest), and path.
Click
Default
, and the device is restored to default configuration. Click
Refresh
to view the
latest configuration.
6.2.2.1 Encode
Configure video stream parameters, such as compression, resolution, frame rate, bit rate type,
bit rate, I frame interval, SVC, and watermark.
Step 1 Select >
Camera
>
Encode
>
Encode
.