User's Manual

Operation Manual
21
Figure 6-9 Day/night
Step 2 Configure day and night parameters.
Table 6-6 Description of day and night parameters
Parameter
Description
Mode
You can select device display mode from
Color
,
Auto
, and
B/W
.
Day/Night configuration is independent from profile management
configuration.
●
Color
: The system displays color image.
●
Auto
: The system switches between color and black-and-white
display according to the actual condition.
●
B/W
: The system displays black-and-white image.
Sensitivity
This configuration is available only when you set
Auto
in
Mode
.
You can configure camera sensitivity when switching between color
and black-and-white mode.
Delay
This configuration is available only when you set
Auto
in
Mode
.
You can configure the delay when camera switching between color
and black-and-white mode. The lower the value is, the faster the
camera switches between color and black-and-white mode.
Step 3 Click
Apply
.
6.2.1.7 Illuminator
This configuration is available only when the device is equipped with illuminator.
Step 1 Select >
Camera
>
Illuminator
.
Figure 6-10 Light
Step 2 Configure illuminator parameters.