User's Manual

Operation Manual
16
Figure 6-4 Interface layout (Day/night switch)
6.2.1.2 Image
You can configure picture parameters as needed.
Step 1 Select >
Camera
>
Image
.
Figure 6-5 Image
Step 2 Configure picture parameters.
Table 6-2 Description of picture parameters
Parameter
Description
Style
Select the picture style from soft, standard and vivid.
● Soft: Default image style, displays the actual color of the
image.
● Standard: The hue of the image is weaker than the actual one,
and contrast is smaller.
● Vivid: The image is more vivid than the actual one.
Brightness
Changes the value to adjust the picture brightness. The higher the
value is, the brighter the picture will be, and the smaller the darker.
The picture might be hazy if the value is configured too big.
Contrast
Changes the contrast of the picture. The higher the value is, the
more the contrast will be between bright and dark areas, and the
smaller the less. If the value is set too big, the dark area would be
too dark and bright area easier to get overexposed. The picture
might be hazy if the value is set too small.