User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Configuration Flow
- 3 Device Initialization
- 4 Login
- 5 Main Interface
- 6 Setting
- 6.1 Local
- 6.2 Camera
- 6.2.1 Setting Image Parameters
- 6.2.2 Setting Encode Parameters
- 6.2.2.1 Encode
- 6.2.2.2 Overlay
- 6.2.2.2.1 Configuring Privacy Masking
- 6.2.2.2.2 Configuring Channel Title
- 6.2.2.2.3 Configuring Time Title
- 6.2.2.2.4 Configuring Location
- 6.2.2.2.5 Configuring Font Properties
- 6.2.2.2.6 Configuring Picture Overlay
- 6.2.2.2.7 Configuring Custom Title
- 6.2.2.2.8 Configuring Target Statistics
- 6.2.2.2.9 Configuring Face Detection
- 6.2.2.2.10 Configuring Face Recognition
- 6.2.2.2.11 Configuring Face Statistics
- 6.2.2.3 ROI
- 6.2.3 Setting Audio Parameters
- 6.3 Network
- 6.4 Event
- 6.5 Storage
- 6.6 System
- 6.7 System Information
- 6.8 Setting Log
- 7 Live
- 8 AI
- 9 Camera
- 10 Event
- 11 System
- 12 Security
- 13 Record
- 14 Picture
- 15 Report
- Appendix 1 Cybersecurity Recommendations
Operation Manual
13
6 Setting
This section introduces the basic setting of the camera, including the configuration of Local,
Camera, Network, Event, Storage, System, System Information and Log.
6.1 Local
You can select protocol and configure the storage path for live snapshot, live record, playback
snapshot, playback download, and video clips.
Step 1 Select >
Local
.
Figure 6-1 Local
Step 2 Click
Browse
to select the storage path for live snapshot, live record, playback
snapshot, playback download, and video clips.
Table 6-1 Description of local parameter
Parameter
Description
Protocol
You can select the network transmission protocol as needed, and the
options are
TCP
,
UDP
and
Multicast
.
Before selecting
Multicast
, make sure that you have set the
Multicast
parameters.